References: [1] ETSI EN 300 744 V1.4.1 (2001-01), European Standard, Digital Video Broadcasting (DVB); Framing Structure, Channel Coding and Modulation for DTT, ETSI, 2001. [2] Arifuzzaman, A., Saleh, M., Tarique, M., Islam, R. (2013). Effects of Filters on DVB-T Receiver Performance under AWGN, Rayleigh and Ricean Fading Channels, IJCNC, 5 (4) 87-101. [3] Polák, L., Kratochvil, T. (2010). DVB-T/H Digital Television Transmission and its Simulation over Ricean and Rayleigh Fading Channels, Elektrorevue, 12 (6) 74-1-74-7. [4] Kalogirou, V. P., Velivasaki, T. H. N., Capsalis, C. N. (2010). Performance Measurements of a DVB-T System Affected by 5-MHz Generic Adjacent Channel Interference, Progress in Electromagnetics Research C, vol. 17, p. 1-15. [5] Poole, I. Antenna Polarisation or Polarization, www.radio-electronics.com [6] Annex A: UHF Technical Compatibility Issues, Ægis Systems Limited, 2006. [7] Sadinov, S., Daneva, P., Kogias, P. (2014). Description and Simulation of OFDM Reception Process, Journal of Engineering Science and Technology Review, Kavala, Greece, 7 (3) 18-22. [8] Todorova-Sokolova, T. (2016). Engineering in Public Administration, Journal of Multidisciplinary Emgineering Science and Technology (JMEST); 3 (5) 4884-4887. Retrieved from http://www.jmest.org/vol-3-issue-5-may-2016/; JMESTN42351607. [9] Konov, K. (2010). Digital Radio and Television Broadcasting, Dios, S. [10] Panagiev, O. B. (2010). Handbook for Laboratory Exercises in Radio and Television Systems and Networks, Sofia, Pubishers of Technical University of Sofia. |